|
topdoors
Date: 02/27/2007
Views: 2062
|
built-incabinet
This was the first time the 5 plywood boxes were assembled. Thankfully, there was 3" of clearance at the top!
Date: 02/23/2007
Views: 1982
|
doorparts
Here are all the rails and stiles for the 9 cabinet doors. Most of these are quartersaw.
Date: 02/23/2007
Views: 1787
|
|
edgedetail
This is an edge detail that I used on our kitchen island as well. It helps to hide the glue joint as well as softening the edges - a good thing to protect little boys heads.
Date: 02/23/2007
Views: 1930
|
leftside
The grey "panel" in this photo is a chalkboard. A local, downtown Catholic high school closed a few years ago, and one of the architectrual salvage companies saved all the slate clalkboards. I was able to buy a broken one which provided this pie
Date: 02/23/2007
Views: 2045
|
A2inAction
The bench seat is a large slab of maple that I harvested from a friends tree a few years ago. I took it to A&M wood in Cabridge to have them surface it on their 19" jointer and thicknesser - but did the finished surface with my A2 jointer.
Date: 02/25/2007
Views: 2072
|
|
Doorparts
All the door parts ready to be assembled.
Date: 02/25/2007
Views: 1979
|
shavings
Lots of shavings from planing the door parts.
Date: 02/25/2007
Views: 1947
|
Lucasbench
Here is Lucas testing out the bench.
Date: 02/25/2007
Views: 2043
|
